Characteristics variation of coal combustion residues in an Indian ash pond.

Coal-fired power plants all over the world are cited as one of the major sources that generate huge quantities of coal combustion residues (CCRs) as solid wastes. Most frequently CCRs are collected through electrostatic precipitators, mixed with bottom ash by hydraulic systems and deposited in ash ponds. The quality of the CCRs at different locations in one of the ash ponds in Central India was evaluated to understand the variation in characteristics with a view to effective utilization. Results revealed that the presence of fine particles (< 50 mocrom) increased with increasing distance from the ash slurry inlet zone in the ash pond. Wide variations in the bulk density (800-980 kg m(-3)), porosity (45-57%) and water-holding capacity (57.5-75.7%) of CCRs were recorded. With increasing distance the pH of the CCRs decreased (from 9.0 to 8.2) and electrical conductivity increased (from 0.25 to 0.65 dS m(-3)). The presence of almost all the heavy metals in CCRs exhibited an increase with distance from the ash slurry discharge zone due to the increase in surface area (from 0.1038 to 2.3076 m2 g(-1)) of CCRs particles. The present paper describes the variation of characteristics of CCRs deposited in the ash pond and their potential applications.     

Prediction of Flue Gas Composition of an Incinerator Based on a Nonequilibrium-Reaction Approach

A nonequilibrium-reaetion model is developed to predict the flue gas composition of an incinerator for solid waste combustion and gasification. The model may also be effectively utilized to predict the composition of exit gas from the primary chamber of an incinerator where invariably substoichiometrie combustion conditions exist The model assumes that the drying and pyrolysis of waste occurs in sequence followed by combustion of devolatilized gas and residue separately. The model is applied to the combustion of pine wood, and the flue gas compositions are computed as a function of operating parameters such as temperature (1100 to 1500 K), initial moisture content (0 to 40 percent), and percentage excess air (up to 100 percent). The model is extended to include substoichiometric combustion (to simulate the gasification process without steam injection) to compare its predictions with the available experimental data. The general agreement of theory and experiment is good.     

Microwave assisted solvent-free synthesis and biological activities of novel imines (Schiff bases)

Twelve new ortho-Hydroxyketimines were synthesized by conventional as well as microwave method and evaluated for their antinemic activity against Meloidogyne incognita [(Kofoid and White) Chitwood]. Conventional methods for synthesis of Schiff bases require refluxing at 140°C of the reactants in different solvents for at least 24 h or more, where as the microwave-assisted synthesis has brought down the reaction time from 24 h to 1 minute. The procedure reported is simple as it does not require any organic solvents and the time has been reduced to only 1 minute. Comparative yields of all compounds by different methods revealed that the yield was low in conventional method (79–87%) as compared to microwave assisted synthesis (94–97%). The bioassay revealed that all the test compounds exhibited promising nematicidal activity; N-propyl-2-hydroxypropiophenonimine being the most effective with LC₅₀ value of 74.46 mgL^?1 followed by N-hexyl-2-hydroxyacetophenonimine with LC₅₀ value of 99.60 mgL^?1 after 72 h of exposure. The results obtained from bioassay indicated that this class of compounds has not only given a lead with regard to potential of Schiff bases in pest control, but has suggested that a carbon chain length of 6 atoms in the side chain is optimum on the basis of structure activity relationship (SAR).     

Receptor modeling for source apportionment of polycyclic aromatic hydrocarbons in urban atmosphere

This study reports source apportionment of polycyclic aromatic hydrocarbons (PAHs) in particulate depositions on vegetation foliages near highway in the urban environment of Lucknow city (India) using the principal components analysis/absolute principal components scores (PCA/APCS) receptor modeling approach. The multivariate method enables identification of major PAHs sources along with their quantitative contributions with respect to individual PAH. The PCA identified three major sources of PAHs viz. combustion, vehicular emissions, and diesel based activities. The PCA/APCS receptor modeling approach revealed that the combustion sources (natural gas, wood, coal/coke, biomass) contributed 19–97% of various PAHs, vehicular emissions 0–70%, diesel based sources 0–81% and other miscellaneous sources 0–20% of different PAHs. The contributions of major pyrolytic and petrogenic sources to the total PAHs were 56 and 42%, respectively. Further, the combustion related sources contribute major fraction of the carcinogenic PAHs in the study area. High correlation coefficient (R ² > 0.75 for most PAHs) between the measured and predicted concentrations of PAHs suggests for the applicability of the PCA/APCS receptor modeling approach for estimation of source contribution to the PAHs in particulates.     

Bioconcentration and metabolism of DDT, fenitrothion and chlorpyrifos by the blue-green algae Anabaena sp. and Aulosira fertilissima

Anabaena and Aulosira fertilissima showed a marked ability to accumulate DDT, fenitrothion and chlorpyrifos. Although the maximum accumulation of DDT was almost the same in both organisms, there were significant differences in their abilities to accumulate fenitrothion and chlorpyrifos. Patterns of uptake of DDT under different treatments were also similar in both Anabaena and Aulosira, but there were significant differences in the patterns of accumulation of fenitrothion between these two organisms. In Aulosira the maximum accumulation of fenitrothion was observed on the second day, whereas, in Anabaena, maximum accumulation was noticed on the first day. A completely different pattern of accumulation of chlorpyrifos was observed in Aulosira, which continued to accumulate chlorpyrifos throughout the experimental period. Bioconcentration of DDT in Anabaena and Aulosira ranged from 3 to 1568 ppm (microg g(-1)) and 6 to 1429 ppm, respectively. Bioconcentration of fenitrothion and chlorpyrifos in Anabaena varied from 53 to 3467 ppm and 7 to 6779 ppm, respectively. In Aulosira the bioconcentration varied from 100 to 6651 ppm and 53 to 3971 ppm for fenitrothion and chlorpyrifos, respectively. Anabaena and Aulosira metabolised DDT to DDD and DDE. Amounts of these DDT metabolites detected in the organisms were dependent on the concentration of treatment. DDD was the major, and DDE the minor, metabolite. These organisms were not able to metabolise the organophosphorus insecticides, fenitrothion and chlorpyrifos.     

Semen quality of environmentally exposed human population: the toxicological consequence

Human data on the relationship of semen quality with pesticide and metals are mostly inconsistent. The purpose of the study is to confirm the toxicity of organochlorine pesticide β- and γ-hexachlorocyclohexane (HCH), DDE and DDD, and metals lead or cadmium on sperm motility in epidemiological study among fertile and infertile men and to determine whether in vivo and in vitro results are in the same direction. Semen analysis and estimation of the toxicants were done in 60 fertile and 150 infertile men. In the in vitro studies, sperm were exposed to the highest levels of these toxicants found in vivo, as well as five and ten times higher, and to the mixture of all compounds. The study assesses sperm viability and motility for a period ranging between 30 min and 96 h. Epidemiological data showed an inverse correlation of toxicant with sperm motility. In vitro study showed that γ-HCH and lead after 12 h, cadmium after 8 h, and coexposure to toxicants after 6 h of exposure caused significant concentration- and duration-dependent decline in sperm motility. Data of in vitro study were concurrent with epidemiological finding that might be useful in establishing the possible association between exposure and effect of these selected pollutants on sperm motility.     

Settlement analysis of fresh and partially stabilised municipal solid waste in simulated controlled dumps and bioreactor landfills

The patterns of settlement of fresh as well as partially stabilised municipal solid waste (MSW), undergoing degradation in five different landfill lysimeters, were studied elaborately. The first two lysimeters, R1 and R2, contained fresh MSW while the other three lysimeters, R3, R4 and R5, contained partially stabilised MSW. R1 and R3 simulated conventional controlled dumps with fortnightly disposal of drained leachate. R2 and R4 simulated bioreactor landfills with leachate recirculation. Fortnightly water flushing was done in R5. Settlement of MSW, monitored over a period of 58 weeks, was correlated with the organic carbon content of leachate and residual volatile matter in the MSW to establish the relationship between settlement and organic destruction. Compressibility parameters such as modulus of elasticity and compression indices were determined and empirical equations were applied for the settlement data. Overall settlements up to 49% were observed in the case of landfill lysimeters, filled with fresh MSW. Landfill lysimeters with liquid addition, in the form of leachate or water, experienced lower primary settlements and higher secondary settlements than conventional fills, where no liquid addition was practised. Modified secondary compression indices for MSW in lysimeters with leachate recirculation and flushing were 30%-44% higher than that for lysimeters where no liquid addition was done. Secondary settlements in bioreactor landfills were found to vary exponentially with time.     

Microbial populations and enzyme activities in soil in situ under transgenic corn expressing cry proteins from Bacillus thuringiensis

Transgenic Bt crops produce insecticidal Cry proteins that are released to soil in plant residues, root exudates, and pollen and that may affect soil microorganisms. As a continuation of studies in the laboratory and a plant-growth room, a field study was conducted at the Rosemount Experiment Station of the University of Minnesota. Three Bt corn varieties that express the Cry1Ab protein, which is toxic to the European corn borer (Ostrinia nubilalis Hübner), and one Bt corn variety that expresses the Cry3Bb1 protein, which is toxic to the corn rootworm complex (Diabrotica spp.), and their near-isogenic non-Bt varieties were evaluated for their effects on microbial diversity by classical dilution plating and molecular (polymerase chain reaction-denaturing gradient gel electrophoresis) techniques and for the activities of some enzymes (arylsulfatases, acid and alkaline phosphatases, dehydrogenases, and proteases) involved in the degradation of plant biomass. After 4 consecutive years of corn cultivation (2003-2006), there were, in general, no consistent statistically significant differences in the numbers of different groups of microorganisms, the activities of the enzymes, and the pH between soils planted with Bt and non-Bt corn. Numbers and types of microorganisms and enzyme activities differed with season and with the varieties of corn, but these differences were not related to the presence of the Cry proteins in soil. The Cry1Ab protein of Bt corn (events Bt11 and MON810) was detected in most soils during the 4 yr, whereas the Cry3Bb1 protein was not detected in soils of Bt corn (event MON863) expressing the cry3Bb1 gene.